menu Mobile Menu
Flannery, Inc.

Plaster F-Mold

Colorway
Clear Anodized
Usage
Commercial, Residential
Delivery
check-mark
FedEx Priority Overnight
Price Range
$$
Sku
FPM 50-50
Available Sizes:
1/2 in W x 1/2 in D
arrow-up
Description
Flannery’s Plaster F-Mold creates an aesthetic termination reveal in any stucco wall system. Typically installed where a stucco wall terminates at an opposing wall or dissimilar material, the Plaster F-Mold can act as a stucco stop with a built in reveal.
Architectural
Moulding & Trim/Metal Profiles
Collection Name
Plaster & Stucco Trim
Size
"A" Depth=1/2 in ; "B" Width=1/2 in; "A" Depth=1/2 in ; "B" Width=3/4 in; "A" Depth=5/8 in ; "B" Width=1 in; "A" Depth= 5/8 in ; "B" Width=2 in; "A" Depth= 5/8 in ; "B" Width=1/2 in; "A" Depth= 5/8 in ; "B" Width=3/4 in; "A" Depth= 3/4 in ; "B" Width=1 in; "A" Depth= 3/4 in ; "B" Width=1 1/2 in; "A" Depth=3/4 in ; "B" Width=2 in; "A" Depth=3/4 in ; "B" Width=1/4 in; "A" Depth=3/4 in ; "B" Width=3 in; "A" Depth=3/4 in ; "B" Width=4 in; "A" Depth=3/4 in ; "B" Width=1/2 in; "A" Depth=3/4 in ; "B" Width=3/4 in
Series Name
Termination
Custom Capabilities
Paint colors can be customized
Availability
Typically Stocked
Lead Time
1 Week
Order Increments
Flannery's Aluminum Trims are shipped and stocked in 10-foot lengths unless otherwise specified
Country of Origin
United States
State of Origin
Texas
Product Details
  • Flannery's Plaster & Stucco Trims are standard extruded aluminum alloy 6063 T5 and have a typical 0.050" or greater nominal wall thickness.
  • Extruded Plaster & Stucco Trims are aesthetic trims not intended to hold or support the full weight of any Stucco or Plaster system.
  • Flannery's Trims meet or exceed ASTM B221 for extruded aluminum products.
  • Flannery's Aluminum Trims come in 10" lengths typically and shall have a standard stock finish of Mill Finish (for field priming & painting) or Clear Anodized (some may be stocked in Black Anodized)
Content
Aluminum
Format
Modular
Width
2 in
Indoor & Outdoor
Outdoor
Applications
Ceiling
Installation
Install all Plaster F-Molds using full ten-foot lengths wherever possible. Attach Plaster F-Molds over the weather resistant barrier (WRB) to the framing with nails, screws, or other approved fastening methods. A shiplap of building paper or WRB may need to be installed over the attachment flange if the Plaster F-Mold is being used as a stucco stop. All Plaster Trims must be cut accurately and installed with tight, neat joints. All nailing flanges must be covered with lath and all butt joints must be sealed. Manufacturer recommends that a carbide tip blade along with lubricant be used when cutting any aluminum trims
Manufacturer Notes
Flannery's Plaster & Stucco Trims are standard extruded aluminum alloy 6063 T5 and have a typical .050" or greater nominal wall thickness. Extruded Plaster & Stucco Trims are aesthetic trims not intended to hold or support the full weight of any Stucco or Plaster system. Flannery's Trims meet or exceed ASTM B221 for extruded aluminum products. Flannery's Aluminum Trims come in 10" lengths typically and shall have a standard stock finish of Mill Finish (for field priming & painting) or Clear Anodized (some may be stocked in Black Anodized). Other factory finishes, including liquid or powder-coated paint, Chem-Film, Primer and special Anodizing finishes are available
Climate Impact
100% Recyclable
End-of-Life Options
100% Recyclable

Flannery, Inc.

Flannery is a family-owned and operated manufacturer of a wide range of aluminum trim products designed to complement interior and exterior walls and ceilings. Flannery is pleased to provide technical assistance and service to enable any builder, architect, or owner to achieve their design goals.
Learn More
Image Flannery, Inc.