Crushed recycled glass, and pigments bound together with a polymerized orthophthalic polyester resin. Selected colors also contain sea shells. Does not contain cement.
18 lbs/sqft for 0.75in (2cm) thickness. 12 lbs/sqft for 1.25in (3cm) thickness
Overall Thickness
0.75in (2cm), 1.25in (3cm)
Edge / End
Edges should be rounded or chamfered to a minimum of 0.0625 in. Inside corners without a seam require a minimum of 0.25 in radius to reduce stress. Does not apply to two-piece seamed solutions. Outside corners should have a minimum radius of 0.125 in
Wipe down using a damp soft cloth. To remove surface debris, use a soft cloth and mild cleaner. Do not use chlorine bleach, ammonia, oven cleaners, Comet?®, Soft Scrub?®, SOS?®, Lime Away?®, products with pumice, paint removers, furniture strippers, citrus based cleaners, or tarnish cleaners on or near the surface, as these contain harsh chemicals and/or abrasives that can cause damage. No sealing required
Kitchen countertops, vanities, or other similar horizontal surfaces. Can also be used for wall cladding
Installation
Stone working/diamond tooling must be used for cutting, shaping, and polishing. Do not install on any cabinet or base that cannot support a minimum of 18 lbs/sqft. Seams must be supported on both sides of the seam on front and back. Seaming over or through an appliance is not recommended. Recommended seam width is less than 0.0625in. Adhere to cabinets or base using dabs of flexible adhesive. Do not use mechanical fasteners directly with the surface or install over existing countertops. Refer to the Fabrication and Installation Guide for additional information
Manufacturer Notes
Minor variations in the surface may be felt with a bare hand. These are part of the aesthetic and are not a defect unless they are deeper than 0.0625in. Be careful not to damage surface by sudden changes in temperature. The use of a hot pad or trivet is always recommended to prevent thermal shock
GEOS Recycled Glass Surfaces use nature as inspiration for the collection of colors which embrace the blue, white, green and brown hues that bring nature into our spaces. Ideal for countertops, this durable countertop has not only high recycled content by high performance in high traffic areas.
Choose the language you’d like to browse the site in.
Select an Associated Product
Add a brand = Save a package
Material Bank
Business Intelligence
Term & Conditions
The data contained herein constitutes confidential information of Material Bank, proprietary in nature. You and your organization have access to this information as a result of agreeing to the Standard Terms and Conditions detailed in your Brand Partner Agreement. These terms state this confidential information shall not be distributed or shared with others outside of your organization or with any of your affiliate companies. By proceeding, you acknowledge and agree to use the contained information exclusively as detailed in your Brand Partner Agreement’s Standard Terms and Condition.If you have any question as to the use of this data contact us at brandservices@materialbank.com.
Crushed recycled glass, and pigments bound together with a polymerized orthophthalic polyester resin. Selected colors also contain sea shells. Does not contain cement.
18 lbs/sqft for 0.75in (2cm) thickness. 12 lbs/sqft for 1.25in (3cm) thickness
Overall Thickness
0.75in (2cm), 1.25in (3cm)
Edge / End
Edges should be rounded or chamfered to a minimum of 0.0625 in. Inside corners without a seam require a minimum of 0.25 in radius to reduce stress. Does not apply to two-piece seamed solutions. Outside corners should have a minimum radius of 0.125 in
Wipe down using a damp soft cloth. To remove surface debris, use a soft cloth and mild cleaner. Do not use chlorine bleach, ammonia, oven cleaners, Comet?®, Soft Scrub?®, SOS?®, Lime Away?®, products with pumice, paint removers, furniture strippers, citrus based cleaners, or tarnish cleaners on or near the surface, as these contain harsh chemicals and/or abrasives that can cause damage. No sealing required
Kitchen countertops, vanities, or other similar horizontal surfaces. Can also be used for wall cladding
Installation
Stone working/diamond tooling must be used for cutting, shaping, and polishing. Do not install on any cabinet or base that cannot support a minimum of 18 lbs/sqft. Seams must be supported on both sides of the seam on front and back. Seaming over or through an appliance is not recommended. Recommended seam width is less than 0.0625in. Adhere to cabinets or base using dabs of flexible adhesive. Do not use mechanical fasteners directly with the surface or install over existing countertops. Refer to the Fabrication and Installation Guide for additional information
Manufacturer Notes
Minor variations in the surface may be felt with a bare hand. These are part of the aesthetic and are not a defect unless they are deeper than 0.0625in. Be careful not to damage surface by sudden changes in temperature. The use of a hot pad or trivet is always recommended to prevent thermal shock